Quote:
Originally Posted by BadBillyJack
It appears you have the RPO UQA-CM8* (*without CM8) and it looks like you're tied into the X1 connector;
Pin 1 color BU/GY Left/Rear Subwoofer Speaker Control (+),
and Pin 5 color GN/BK Left/Rear Subwoofer Speaker (-) Low Reference.
What converter are you using, and where did you tap into for the remote turn on lead?
|
The wires I tied into are front right door speaker which is the bass. All other speakers are on the green connector. X2 I believe it would be. For remote I used a LOC2SL adapter to get remote for now. Turns on amp when signal through speaker is detected. The bose amp has no switched power on it, only constant.