Quote:
Originally Posted by BradfordCamaro
Front tire on the blue car sticks out way too far. It is pushed out about 20mm.
The back is pushed out about 15mm.
Front be 6-12mm or less if you want to lower
Rear should be less than 15mm if you want to lower.
|
Did you mean our blue car??? those wheels do not stick out at all, nor wheels.
that would mean that instead of a 25et front i would need a 31-35et on a 20x10?? if so then HRE, MRR, LG and everyone else is wrong. but is not. a 20x10 wheel can safely be at about 27et anything higher will hit the strut and wont be drive-able any higher on the rears and it will rub inside, is right on point. if you do a 20x8.5 or 20x9 closer to factory then you will require a 20et-25et anything higher and they will look like emergency donut wheels.
just saying but to each its own.
we do like to hear everyone's opinion and hopefully my answer is not taken like a bashing
