Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Reineke · 11-16-2015, 07:46 PM

When you first cycle the key in the ignition, the panel does a bulb test. See if the CEL illuminates at that time. If it doesn't, then the led/bulb is probably bad. Without seeing the PCB, you may be able to remove the bad and solder in a new one.

11-16-2015, 07:46 PM	#5
Reineke Drives: 2010 SW Camaro 2SS RS 6M Join Date: Aug 2012 Location: Van Alstyne, TX Posts: 97	When you first cycle the key in the ignition, the panel does a bulb test. See if the CEL illuminates at that time. If it doesn't, then the led/bulb is probably bad. Without seeing the PCB, you may be able to remove the bad and solder in a new one.