[Z28sr2fast4yall]

Originally Posted by KMPrenger

I agree. There are some clear differences, but the camo pretty much conceals everything else pretty well.

Hard to say if the wheels are the versions from the ATS-V/CTS-V or just pulled straight from the 5th gen ZL1/1LE...they are very similar, except the Cadillac wheels are 19s" and have a bit less concave offset than the Camaro wheels. Too hard to tell from these far away shots.

Also, one, if not both of these certainly could be wide body in my opinion. An inch or two added in fender flair on either side would be too difficult to spot under the camo in these shots.

If they use the hood extractor from the CTS-V (or similar) it will look killer. Someone already photoshopped a 6th gen with it on this forum and the look was very cool.

All I know is, is that I hope some of these bits (like the rockers) can be swapped onto a regular SS model. I do want!

I have photoshops of the sixth gen with a heat extractor hood... And the splitters and all, from the spy shots... I have to final touch it and then send it in... So they'll be circulating soon...