Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Sqeaky seats - Or "Does this car make my butt look big?"

Stett · 09-28-2010, 07:52 PM

#09-08-50-009A: Scraping/Moaning/Creaking Noise

from Front Seats (Apply Lubricant) - (Jun 4, 2009)

Condition
Some customers may comment about a scraping or moaning type noise coming from the front of
the front seat track area. This condition occurs when the seat assembly is being cycled into the
full forward position. Some customers may also comment about a creaking noise coming from
the driver's six-way power seat when it is in the full rearward position. This condition only
applies to six-way power seats.
Cause
This scraping or moaning condition may be caused by the seat position sensor (SPS) making
contact with seat position sensor target bracket. This contact is made in the lead in area of the
SPS. This contact area controls the function of the SPS. The drivers seat creaking condition may

be caused by the lack of lubricant in the rear of the drivers seat track assembly.

http://www.camaro5.com/forums/showpost.php?p=2043842&postcount=19

Had the problem on mine after 200 miles. Took it back to the dealer and it is no longer a problem.

09-28-2010, 07:52 PM	#14
Stett Drives: 11 IBM 1LTRS, '89 Firebird Formula Join Date: May 2010 Location: Orlando, FL Posts: 177	Seats creak? There's a TSB for that... #09-08-50-009A: Scraping/Moaning/Creaking Noise from Front Seats (Apply Lubricant) - (Jun 4, 2009) Condition Some customers may comment about a scraping or moaning type noise coming from the front of the front seat track area. This condition occurs when the seat assembly is being cycled into the full forward position. Some customers may also comment about a creaking noise coming from the driver's six-way power seat when it is in the full rearward position. This condition only applies to six-way power seats. Cause This scraping or moaning condition may be caused by the seat position sensor (SPS) making contact with seat position sensor target bracket. This contact is made in the lead in area of the SPS. This contact area controls the function of the SPS. The drivers seat creaking condition may be caused by the lack of lubricant in the rear of the drivers seat track assembly. http://www.camaro5.com/forums/showpost.php?p=2043842&postcount=19 Had the problem on mine after 200 miles. Took it back to the dealer and it is no longer a problem. __________________ 1100 - 7/19 - Preliminary order accepted 2000 - 7/21 - Order accepted by GM 2500 - 7/28 - Order preferenced 3000 - 7/28 - Order accepted by production control 3400 - 8/09 - Order broadcast 3800 - 8/17 - Order produced 9/02 - DELIVERED!