Quote:
Originally Posted by dpevans
Rotor rings from ZZ performance fit the OEM hats. I did not see them listed on the web site but I purchased a set last year. You might have to call them to see if available. You also don't need the hardware kits you only need new crimp nuts.
|
Agreed. I put the ZZ rings on my stock hats and they've worked equally well to the OEs. They told me these match them exactly in spec. I believe it is
this part, but I would "message the seller" with your exact year and spec and make sure. You can't beat $370 for a pair of new rotor rings. ZZ Performance was also selling a set of the attachment hardware, but it was expensive. I ended up buying
this part, but I would "message the seller" with your exact year and spec and make sure. You can't beat $370 for a pair of new rotor rings. ZZ Performance was also selling a set of the attachment hardware, but it was expensive. I ended up buying
these, which gets you the required new nuts and the not-required-but-nice-to-have new bolts." I found the nuts sold separately somewhere, but they weren't much less expensive than this combo....or if they were, I didn't think metal was "high-temp" steel, which seems important for this use. They sometimes are called "jet nuts" or "deformed/distorted nuts." They are M6 (6mm thread x 1.0). I see that
Pegasus has them for a decent price - these must not have been available when I was looking.