Quote:
Originally Posted by arpad_m
The part number you're looking for is 84732503 or ACDelco 171-1127 (exact same part).
You may want to consider PowerStop Z26 brake pads as ctrlz mentioned above, they're much cheaper and will produce a lot less brake dust. Their part numbers for the SS 1LE are Z26-1405 (front) and Z26-1718 (rear).
|
I am going to say that my front ceramic brembo, were perfect and they fit perfect.
I COULD NOT find a single Brembo ceramic rear brake pad. AT ALL. Even Brembo when you place your Camaro SS in the car filter shows a SINGLE PISTON brake pad.... there are no single piston Camaro SS!
I ended up finding a pair of ceramic pads from Napa yesterday.
https://www.napaonline.com/en/p/ADOAD8943
the only issue, is that the inner with the indicator on it does not fit on the inner. I had to put the outer on the inner and inner on the outer. I find it odd because the indicator is not on the inside for the stock brake pads. Thankfully it did not have a directional arrow, the stock pads do.
I cannot for the life of me, understand why there are SO FEW ceramic options for the rear.
EDIT: TO be perfectly clear, Brembo P10071N is a single piston pad!!!!
I attached a photo you can see the comparison to the original!