Quote:
Originally Posted by 2023-SS
can you heat the Torx bolt without ruining anything?
on motorcycles, they use LocTite on a 50Torx shock bolt, and they are a B to get off
but if you hit it with a Plumbers Torch, it melts the LocTite, and it just unscrews easily.
IDK, just thinking out loud
|
You dont need to remove the steering wheel. With the airbag out of the way and the trim pieces removed, the module is all by itself.
Just do yourself a favor. Its going to be a pain you are gonna want to "see if I can get this plastic clip up just a hair more"... dont. They are fragile and hold the module in. If i remember correctly, I had to go around a few times and slowly open up each 1 at a time till the plastic "relaxes" enough to let the module pop out.
Also... make sure you plus ALL the wires back in. I think there is just 2 or 3. But I forgot 1 and had to do it all over again.