Quote:
Originally Posted by bishopts
does it work with the stock PCV valve? or does it replace it?
|
Sorry my car has been modded for so long I don’t remember much of the original setup lmao. The PCV lines from the valve covers to the OEM air/oil separator are still intact. The MM Wild uses a big (-10 or -12 AN options, I went with -12) line from the oil cap location on the valve covers to the MM Wild for direct communication with crankcase pressure. It also has a small vacuum line that allows the engine to pull through the catch can under typical use. But the big line is the emergency “blow off” if crankcase pressure builds up at all.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|