CAMARO6 - View Single Post - Stanadyne Goliath high pressure fuel pump!?

JSH · 11-21-2025, 03:17 PM

It made 1045/1055 today. Race gas only.

It did not make 1040 2 weeks ago because I misread the Dyno sheet. The 1040 represented a blip when the car shifted to 7th. I don't have the exact number, but it looks like from the lines on the graph it probably made around 980/980.

All the numbers look great. 22.5°. lambda going down from 85 early to 81 at the shift point. MAT 85-90. No negative advance or retard or any other similar type of events. The car ran real good

I feel sure that an excellent race gas tuner such as Joe M. Could get considerably more power out of it but for today it is what it is

11-21-2025, 03:17 PM	#43
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 4,195	It made 1045/1055 today. Race gas only. It did not make 1040 2 weeks ago because I misread the Dyno sheet. The 1040 represented a blip when the car shifted to 7th. I don't have the exact number, but it looks like from the lines on the graph it probably made around 980/980. All the numbers look great. 22.5°. lambda going down from 85 early to 81 at the shift point. MAT 85-90. No negative advance or retard or any other similar type of events. The car ran real good I feel sure that an excellent race gas tuner such as Joe M. Could get considerably more power out of it but for today it is what it is __________________ 2020 ZL1LE A10. LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq Last edited by JSH; 11-21-2025 at 03:44 PM.