OK, so the M8x1.25 was too big for terminal 2. The second one up from the bottom in that pic. It did fit terminal 1 though on the bottom. I also bought and tried M6x1.00 and that is too small. Didn’t see M6x1.25 at either store. And I swear it was a 13mm socket to remove it. Could it be SAE?
Thanks I hate cars
Quote:
Originally Posted by bishopts
M6x1.0 will be 8mm and 10mm heads normally.
M8x1.25 will be 12mm and 13mm heads
Its the most used sizes across the board for all car makes.
M10 is where it changes.
M10x1.25 will be cars from Asia mostly. 12mm and 14mm heads. A nissan from Mexico will have those on the engine but not the body.
M10x1.5 will be most other areas. 13mm, 15mm, 16mm heads. That nissan from Mexicos body and engine mount bolts.
M12x1.25 is also asia. 17mm and 19mmbheads
M12x1.5 will be 16mm, 18mm, 21mm heads. Most lugnuts are that thread
|
__________________
2017 Camaro 2LT 1LE M6 Black/Black bought 10/31/23 37,500 mi
(sold) 2015 Camaro 2LT/RS CRT NPP #35749 Built: 3/10/15 Bought 8/9/15
Previous Rides: '82 Camaro Berlinetta, '86 Camaro 305 V8 4 brl, '99 Dodge Avenger, '01 Firebird