View Single Post
Old 10-22-2025, 12:37 PM   #46
2023_ZL1-AUTO

 
2023_ZL1-AUTO's Avatar
 
Drives: 2023 ZL1
Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,287
Quote:
Originally Posted by JSH View Post
Got the car out of shop #2 about 2 weeks ago. As far as I can tell, they fixed all the issues that I mentioned in my lead in post. At this point I would give them 4.5/ 5 with the only uh-oh being, I had hoped that when the heads were off the engine they would clean the lower areas of the engine compartment that are larger than inaccessible when it was all back together. They cleaned it but not as well as I had hoped. I realize that's pretty nitpicky.

The tune is not 100% but it's ready for the dyno which I'll try to get done next week. I don't see any reason it should take more than three or four pulls.

It looks like the timing of all of this is such that I will miss the last few weekends of the racing season.
Bro ! Glad it turned out better than is started out to sound ! Exciting to see you get on the dyno !!! It only takes one small good thing to turn the whole day good! Congrats!
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs•Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper/ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI IC Stage 2•THPSI Port w/875cc Inj•Katech Dual Fuel Pump•DSX Aux Pump•SW 2" Headers w/Legend NPP•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout &Bushings Kit•BMR Rear Suspension & 15" Conversion•DSS 1pc DS•RPM 6-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
2023_ZL1-AUTO is offline   Reply With Quote