|
I just did mine. Sucked a little fluid out of the master and was able to squeeze the pads back using only my fingers.
Use a plastic mallet to tap the pins back in. I used a ball peen hammer, but managed to accidentally hit the back of the caliper with the hammer....it chipped the powder coating right off (about a half square inch worth).
__________________
2023 ZL1 Radiant Red 6 spd, pdr, carbon fiber hood
1100 10/28/22
2000 12/6/22
3400 12/17/22
TPW 1/9/23
delivered 2/7/23
|