09-11-2025, 05:26 AM
|
#34
|
Drives: 2018 1SS 1LE
Join Date: Feb 2017
Location: Austin, Texas
Posts: 1,573
|
My first attempt at a DIY splitter. I run mine on track with about 3" ground clearance with a 6" extension using 18" tires. The height is easily adjusted by the support rods since its all chassis mounted. The splitter can be lifted and locked in a raised position for trailer loading etc using AJs lift and lock support rods.
__________________
Mods: MSD, Headers, 95mm TB, high flow cats, full 3" exhaust, SPL, MCS 2-way remotes, sway bars, rear diff lock outs, Sparco racing seats, 6 point harness, CMS roll bar, Nine lives wing, 6" splitter, ACS canards.
www.youtube.com/@Racer_Mike87 |
|
|