[SSShark]

I'm in the process of painting them. The driver side is painted and just needs to be cleared. I still have to paint and clear the passenger side. I've notched the covers based on my having the flex fuel sensor on the passenger side and the catch can hose on the driver side. The posts with the grommets on the undersides need to be dremeled off and moved accordingly. Also, one grommet post on each cover is longer than the other, so you'll need to shorten them . You won't be able to utilize the 4 hooks that would normally grab onto the plastic valve covers because of the angle. This is the best solution that I could come up with.