|
Thanks for the replies.
I do use the zl1 lift pads for the front and the hockey puck and pinch weld puck when I lift the rear. I am using big red jack stands So those might be too aggressive for the pinch weld when I lift side to side. I could also try lifting to the lowest height but I think the weight transfer would be the same. I might have the wrong jack stands for the Camaro. These are what I had for my GT350 that I installed a jacking rail on.
Do you guys put the jack stand directly on the a lift pad or lift puck or do you put the jack stand directly on the pinch weld?
|