05-01-2025, 09:59 AM
|
#3
|
Drives: 2022 Vivid Orange LT1-M6
Join Date: Dec 2015
Location: Houston TX
Posts: 466
|
Quote:
Originally Posted by wnta1ss
No, you not need the metal plate or paper gasket for your 95, as they are just intended for mounting a stock (87) throttle onto the large opening of the MSD. Metal plate would go onto the MSD o-ring and the paper gasket would then seal the throttle to the plate when mounting an 87. With a 95 though, you can just mount the throttle right onto the o-ring on the front of the MSD, like you'd mount a 103. I have done this, put a 95 directly onto an MSD, and ran the car for a few years like that.
|
Thanks!
__________________
2022 Vivid Orange M6 LT1 - 2" ARH headers with cats and offroad setup (full system,), 3" ARH Pure Thunder mufflers, ported MSD intake, Soler 95mm tb, Rotofab CAI, E85 flex fuel, tuned by Jason@snackbartuning, Forgestar D5 18x8 fronts with 245/40/18 and Forgestar D5 17x10 rears with 275/40/17 summer tires.
Old car 2016 M6 SS - MSD intake, Rotofab, 2" ARH headers with cats, E85 with EFI Tuning. Best ET: 11.7@122mph
|
|
|