|
Did you change the sensor i circled? That is the barometric sensor which is associated with p2230. If you changed the MAP sensor then that would be a different code. Their are actually two MAP sensors, one on the front of blower pre rotor pack, and one on the back post rotor pack entering the motor.
Just want to be clear as you stated you replaced the MAP sensor which is different than Baro Sensor.
__________________
Check out my youtube channel
https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8
Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come...
Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket
760 Whp / 700 Wtq E50 |