CAMARO6 - View Single Post

ctrlz · 04-01-2025, 09:40 AM

Do the old and new parts measure identically, particularly diameter of piston?
EDIT: Just looking on ebay, all the pulls seem to include both the master cylinder and the booster as a unit. So, maybe you were not supposed to separate them. Sounds like you may have been battling threadlocker to remove the MC.
At any rate, Master cylinder/booster combo units go for about $100 on ebay (for gen6 ZL1)

04-01-2025, 09:40 AM	#2
ctrlz Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016 Location: Ocean City, NJ Posts: 3,578	Do the old and new parts measure identically, particularly diameter of piston? EDIT: Just looking on ebay, all the pulls seem to include both the master cylinder and the booster as a unit. So, maybe you were not supposed to separate them. Sounds like you may have been battling threadlocker to remove the MC. At any rate, Master cylinder/booster combo units go for about $100 on ebay (for gen6 ZL1) Last edited by ctrlz; 04-01-2025 at 09:55 AM.