Quote:
Originally Posted by beowulf556
Thanks for the reassurance!  Does the velrco on the heat shroud hold up pretty well? |
I would move the entire harness as I did, between the coolant bottle and strut tower. If you do a little digging, you will see that there is plenty of length to make it happen. Get some of the larger zip-ties from Harbor Freight and use them to secure the harness to the battery cable which already makes this path.
What I would be concerned with and I brought this up in a FB thread before... is the front right brake line that is extremely close to the header tube. I removed my line and using a bending tool I bought at O'reilly's, straightened out the first two bends and relocated it to exit the frame ahead of the subframe mount instead of behind it. I then used the DEI sleeve to cover the brake line to offer more resistance to heat.
I have run a dozen trackdays since this change on my ZLE with zero heat related issues to the wiring or my brake line.
My apologies for not having photos of this at the time, as I purged my iPhone to make more space for current upgrades. Hope this helps.