CAMARO6 - View Single Post

Bangkok_ZL1 · 01-26-2025, 09:29 PM

I know most of you won't have had this issue. But I'm praying here that somebody has an idea of WTF is going on.....
Here's my conundrum. I bought this car that came without DLRs. I don't think any of them had DLRs that came out of HSV Australia. And the DLR Plastic Blockers looked like (Where is the emoji for poop?). So I bought DLR's from EBay (Freemotor) that came with limited instructions which I'm sure in most cases would be fine. But I'm having issues. I put in the lamps in, and they didn't work. I left them in until I returned to Thailand cause they look way better than the blocks. After seeing that "Chev1299"'s (I think that's his handle) spliced the sidemarker's line to power the DLR's, I flat switched the couplers, cause I have both sets of couplers on each side. Then neither worked lamps. I switched them back and the side markers went on. I did turn on the car and manually turned on the lamps as "Frost" said, every scanario, but they still didn't work. I can't believe both lamps are bad brand new. I checked the fuse box, nothing to see there. I don't understand because when I switch the couplers, they still didn't work. but they when I switch them back, the side markers worked. What am I missing here? Does anybody have any idea? What am I missing?

01-26-2025, 09:29 PM	#1
Bangkok_ZL1 Flying around Thailand Drives: 2019 Camaro ZL1 Join Date: Oct 2020 Location: Bangkok, Thailand Posts: 620	A Little DLR help please I know most of you won't have had this issue. But I'm praying here that somebody has an idea of WTF is going on..... Here's my conundrum. I bought this car that came without DLRs. I don't think any of them had DLRs that came out of HSV Australia. And the DLR Plastic Blockers looked like (Where is the emoji for poop?). So I bought DLR's from EBay (Freemotor) that came with limited instructions which I'm sure in most cases would be fine. But I'm having issues. I put in the lamps in, and they didn't work. I left them in until I returned to Thailand cause they look way better than the blocks. After seeing that "Chev1299"'s (I think that's his handle) spliced the sidemarker's line to power the DLR's, I flat switched the couplers, cause I have both sets of couplers on each side. Then neither worked lamps. I switched them back and the side markers went on. I did turn on the car and manually turned on the lamps as "Frost" said, every scanario, but they still didn't work. I can't believe both lamps are bad brand new. I checked the fuse box, nothing to see there. I don't understand because when I switch the couplers, they still didn't work. but they when I switch them back, the side markers worked. What am I missing here? Does anybody have any idea? What am I missing? __________________ Mods - From JRE, the 125 RWHP Kit; From FI Interchillers, the Stage I Interchiller system, 5mm Supercharger/Head spacer plates, Heater blanket; From BMR Suspensions, Motor mounts, Cradle lockout Bushings; From Misc, Train horn in the Abandoned Heat Exchanger location using the exchanger bracket. From Banks, An I-Dash to read it all...