|
If you go back and look at mine posted on page 6, what you WON'T notice, is that I also removed the black retainer from the boot, BUT it's in there, UNDER the boot. Loose, not attached, but it's under there. Was necessary to make everything snug. Shoulda left it on! Without it, the adapter is able to sit too low. You could snug it down in the right place, BUT, then the boot is sorta floating loosely, and the Raceseng boot cap thingy jingles against the bottom of the adapter. With the black retainer on there, I just let the retainer sit naturally where it was, and tightened down the set screws. I think it's about 1/4" higher than stock, if even that much.
|