View Single Post
Old 12-15-2024, 10:12 AM   #74
GreyGhost702
 
Drives: 2019 Camaro 1SS1LE
Join Date: Jan 2024
Location: Utah
Posts: 370


download drake album free online

Went with the red boot collar on mine but not really feeling it since there’s no other red accents in the interior. Also ordered a black collar just in case. Will let it marinate, maybe look at the knee pads and door trim accents, see if a black/grey/red theme works for me. Doing the same under the hood so at least it would be consistent. In either case, some time after Christmas I’ll have an extra boot collar to put up for sale! Need to get some other parts listed as well from the summer build.

Liking the shift weight, not sure that the extra weight makes it feel less notchy on the stock shifter, but I like the feel. 2-3 shift does feel more precise. Will have to give it time. I didn’t damage the stock knob in the swap so if I had to go back it wouldn’t be terrible. A thin and narrow flathead to front and rear of the shift knob are where the tabs are located. After you unstick the boot material from the knob, just press the flathead in those spots to push the clips and give it a little side to side pry to release the clip and then do the opposing side until it slides off. The plastic ring takes a little abuse but totally reusable if you had to get the stock knob back on clean.
__________________
2019 1SS1LE M6 Shadow Gray Metallic
ProCharger D1X Race Kit - 4.25" Pulley || GPI Pistons/Rods - ACL Bearings - ARP Hardware || LME Timing Chain Guide || Katech C5R Timing Chain || Katech OE Spec Billet Oil Pump || OE Ported Heads || CHE Trunnion Upgrade || BTR 220 Cam - BTR .660" Dual Springs - GM Racing "Caddy" Lifters - BTR 3/8" Pushrods (7.825") || ATI Balancer || LT4 Injectors || LT4 HPFP || JMS BAP || DSX Flex Fuel || LT2 Intake Manifold || LTH (Catless) || Stainless Works Redline Series NPP || 91 + 8oz Boostane

7/26/2024 Tuning in progress
GreyGhost702 is offline   Reply With Quote