Quote:
Originally Posted by 6spdhyperblue
If that’s true I’ll send my heads to katech right now.
Then Ill do the cam later. can the cam be done without pulling the heads off using dowels like the LS?
|
You might email or message AMP about to confirm, but I know I read Sam post on FB they have done a bunch of them that way.
Yes, shops have put camshafts in the LT5 without pulling the heads since they are non-AFM hardware. The only reason to ever pull the heads was to remove AFM lifters or if you are doing an aggressive build that requires short travel lifters.