|
Similar was my bar sway bar needed the washer under the lower bolt, the clamp had it so tight that the bar wouldnt rotate, tried all the greases, too. washer fixed it. When disconnected at the end links you should be able to freely rotate end bar arm through its axis.mine would barely budge that way.i tried a graphite impregnated bushing and hardware which didnt solve anything either. Sounded like styrofoam, too. Lsid under that car snd F’d with all of it before that.
Cradle lockout, nonadj bar w adj end link's, upper control arm, upper/lower trailing arms, front cradle braces.
|