Quote:
Originally Posted by cdb95z28
Poly bushings on the BMR stuff?
|
No poly cradle mounts, just changed the front sway bar end links which is the only bmr bushing on front. The back isn’t as noisy as the front and as I stated above I just need to put a washer on the rear sway bar bushing to fix rear noise.
It’s either my control arms or my shocks. Found my coolant reservoir has a lot of play, there’s 3 studs that hold it in position one with a nut one with a rubber boot and the other one is metal on plastic makes a lot of noise so I ordered another one of those rubber boots and will be placing it there. Filled coolant reservoir and bled my coolant via the owners manual instructions. Seemed to help the noise a tad bit but until the rubber boot comes in won’t know if the reservoir is the issue. I’m still leaning towards my shocks.