View Single Post
Old 09-05-2024, 08:44 PM   #9
toohighpsi
 
Drives: 2015 C7 Z06 M7
Join Date: Dec 2012
Location: So-Cal
Posts: 665
Quote:
Originally Posted by Joshinator99 View Post
Good to see you back my friend!

Cool build but you won’t be living with a stock LT4 and 22 psi of boost for long lol…
Thanks! Hoping not to have any issues with the extra 2-3 psi boost, I've always run 19-20 psi boost with the 2650/port on it which has been the last 20K or so miles, engine/car currently have 53K miles on it. I do need to get the low side in line and I'm swapping to a set of 775 cc/min injectors as well on the port side to get the pulsewidth down a bit.

I'm planning to push it a touch further with a 75mm upper to see if it will cross into the 4-digit HP zone then backing down the power a bit at lower vehicle speeds using boost control.
__________________
Mike

www.toohighpsi.com

2015 Corvette Z06 M7
2021 Porsche GT4 M6
2023 Corvette Z51
toohighpsi is offline   Reply With Quote