Quote:
Originally Posted by dreksnot
The Whipple instructions have 3/8" subframe spacers to help the lid clear the hood I presume, as well as a carbon fiber insert.
Q: will a set of BMR motor mounts drop the motor so as not to have to use the spacers?
I contracted BMR and they replied with their mounts are "stock height." But, some others said it will drop the motor 1/2" - anyone know the real answer?
|
I can tell you the BMR mounts dropped my engine by about 1/2". I know this because my large diameter catch can between the radiator and pulley had to be moved down. It had ample clearance before the motor mounts, and I had to slide it down about a half inch after because it almost touched the pulley. Your mileage may vary.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13
Mods being installed-
oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.