View Single Post
Old 07-25-2024, 07:48 PM   #67
Slurpee
 
Slurpee's Avatar
 
Drives: 2020 ZL1 A10; Shadow Gray Metallic
Join Date: Sep 2020
Location: Chicago
Posts: 255
For those following, the ZLE suspension control module did not give me any issues even though it was from an M6 and I am in an A10. No messages on dash, and did not have the warning come on limiting speed to 85 after going over 85.


Just got back from the alignment shop and it's a world of a difference. Car feels like an absolute dart. On MCS recommended settings. I am trying -3.1 F, -2.1 R camber. 7.6 degrees of caster. 0 toe front, 1/32" toe rear. I increased rear camber from -2.4. The outside rears after Ozark didn't even look used, even though outside temp was within 10 degrees of inside temp with an IR pyrometer.
__________________
Slurpee is offline   Reply With Quote