[JSH]

I'm in Lakewood.

Start with an E85 kit, Big Gulp, 103mm, 2650, 3" upper, 10% lower, OEM HPFP, 30+, headers, DSX low side, Might Mouse, Hi-flow cats, tune, and see where that gets you.

You're not going to make 1000 whp w/o opening up your engine. I know, I tried.

Originally Posted by dreksnot

I think I'm down with a target of 750-850rwhp at my mile high altitude (SAE dyno correction 1.2) for a daily driver/weekend warrior ZLE. Would be nice to be able to do this with 91 octane but I have E85 nearby.

I don't want to open the motor or do heads. Prefer not to do LTH, if can get away with it.

Will a setup consisting of:

2650 Maggie
JMS BAP
LPE BB or Goliath
+30% injectors

hit close to that target?

Is a transmission tune necessary at that power level?

I know Kong X-porting the LT4 can provide nice HP gains at the expense of more heat (I don't want meth). Might kill my road course race days.

Was looking at the Whipple 3.0L but having to shim the subframe and cut the hood insert aren't preferable for the ZLE.

Perhaps later, when that HP level isn't working anymore, I can always cam, LTH and put a higher volume LPFP in, or add the upcoming DSX PI setup.