To anyone doing this install check your ball stud, mine did come with a 6mm stud because I had to stop at the hardware store to get a 6mm nut and drilled a letter B hole 0.238 diameter. I was strange because the locking hardware threads were English.
Quote:
Originally Posted by split_bumper
I installed mine tonight using the same components as listed. Very clean and I couldn't be happier with it. Just to clarify, the mount comes with a 1/4-20 ball and stud. You will need a 1/4-20 nut and a washer, I used a nylock so it wouldn't loosen up.
I noticed the OP fed the wire higher up, I just notched the corner of the cover piece slightly so the wire had a void to exit. Here are some pics.
|