|
LT4 Supercharger bleeder tool!
I was having higher than expected temps on my IAT 3 and Ted at JRE recommended this tool. It's probably the best $89 I've spend on a tool!
It fits on a water bottle or a 2 liter bottle. To attach to the fill port/bleeder valve. Just pull the gold housing upward, then put the fitting on the fill port. It slips and snaps on the bleeder/fill port and locks in place when you let go and it's liquid tight. When your done, pull the housing back upward and pull the bottle off. All the excess liquid stays in the bottle and NO MESS! It was a breeze bleeding out the reaming air in my SC coolant system!
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs•Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper/ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI IC Stage 2•THPSI Port w/875cc Inj•Katech Dual Fuel Pump•DSX Aux Pump•SW 2" Headers w/Legend NPP•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout &Bushings Kit•BMR Rear Suspension & 15" Conversion•DSS 1pc DS•RPM 6-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
 |