Quote:
Originally Posted by split_bumper
I also used the amazon lift pads on my ZL1. $34 and I milled an edge so they fit flush and properly supported. The ZL1 addons ones come pre milled and properly fitted I would imagine.
The biggest thing I feel with using jackstands in conjunction with these lift pads is using the circular topped pads rather than the metal forged "claw" tops. Less chance of stuff moving around and sliding that way, especially when you're jacking it up on an angle.
|
Yes, the flat top stands are recommended. I don’t have any, so I use strip from an old leather welding glove as a friction adder between the two metals.