Quote:
Originally Posted by bandier
Not sure with the last post meant, but I'm ready for more info on this project.
|
It identifies the one wire you need to sever to put the timer activation relay in line with the ignition. If you watch the in-car video, inside the hole on the side of the dash with panel off, you can see a sticker that has a color legend for the order of the plugs going into the BCM. There are 5 or 6, all different colors. You want the wire that leads to pin 15 on the BLACK BCM plug.
Hopefully J will find time to finish up the schematic soon. Sorry it's taking a while. We also have a video that will describe how to configure the relay boards.