|
So, as I'm typing this post. I know a 34% or 38% CAM is in my future. Maybe not the near future since spring/summer is right around the corner. But, this fall when the weather turns to SH. The engine will come out and the built will happen accordingly. I might have a one of the many reputable shops here on the forum do the work. But, I've been inspired by what SOCAL.M6.ZLE has done with his! So I might just do the work myself! Regardless, my build still doesn't have the one thing I want most: A choppy idle !
__________________
2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi | 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11
|