CAMARO6 - View Single Post - 2023 1SS Audio and Acoustic Treatment Build Log

keep_hope_alive · 11-04-2023, 05:23 PM

I also took the opportunity to recover the knee bolsters since they are just hard plastic on the SS. I used Resonix Fibermat 25 for padding since it has an adhesive layer to stay put, then wrapped them in fleece fabric and secured with 3M Super 77. Not a pro job, and the driver’s side was first so the passenger side looks better, but It’s much more comfortable.

The cut shape is weird, but that’s just how I wrap corners with a stretchable fleece.

This is the worst one I did, which is why I’m sharing this and not my best.

End result of both knee bolsters on each side:

11-04-2023, 05:23 PM	#39
keep_hope_alive Electrical Engineer Drives: 2023 1SS A10 Black Join Date: Apr 2022 Location: Illinois Posts: 933	I also took the opportunity to recover the knee bolsters since they are just hard plastic on the SS. I used Resonix Fibermat 25 for padding since it has an adhesive layer to stay put, then wrapped them in fleece fabric and secured with 3M Super 77. Not a pro job, and the driver’s side was first so the passenger side looks better, but It’s much more comfortable. The cut shape is weird, but that’s just how I wrap corners with a stretchable fleece. This is the worst one I did, which is why I’m sharing this and not my best. End result of both knee bolsters on each side: __________________ 2023 1SS A10 Black H72/C2U/56W/NPP - Daily Driver 1100: 5/3/22 . . . . . . . 2000: 6/25/22 . . . . . .4000: 8/17/22 . . . . . . . 6000: 9/10/22 Daily Driver mileage update: 64k mi. @ Apr 2026 New Engine @ 22,600 mi. due to dealer confusing bad gas with a bad engine. Build Log: https://www.camaro6.com/forums/showt...6#post11353116