Quote:
Originally Posted by LiqTenExp
Would like to say thanks to TMS and XXX ZL1 for helping out with some details from their installs, I tried to make this as clean as possible. The following threads contain all the details you will need, I have some additional photos in mine, all 3 should be more than enough. This was done as a "no cut" installation, see parts list below.[/LIST]
|
And would like to thank you for your post. I followed it exactly. And it worked out nice. I did a few additional things (spliced the white line to tap in a voltmeter (which is detachable, and spliced the black and grey lines slightly down the loom so i can use the black to feed the voltmeter. and using the grey as a power line from the fuse box to power the AEM Air Fuel meter. Also using that loom to run two small lines. Thanks once again. I even ordered from Mouser international. Shipping was 50 times the price of the connectors. Awesome instructions.