Quote:
Originally Posted by SOCAL.M6.ZLE
Congrats! Those are great numbers!!! I assume you are now maxing out your injectors, or high side?
|
Those are good numbers. That is the most I have ever seen a stock LT4 high side handle with a stock cam lobe on E60. All of the ZL1's I have tuned need +30 and LPE HPFP to run E60 FBO with a Kong X making 13psi on stock pulleys. E50 is the most I have seen on the same setup and considered it safe. But here is the thing, there are tuners out there that will run these engines leaner then Ted or I will. I target .84, I keep injectors <5.8, and I like to see EOI above 150. Anything leaner, higer IPW, or lower EOI I consider running on the edge.