[ZLRob]

Originally Posted by JANNETTYRACING

Sometimes it is good to NOT be a follower.

The only thing we recommend is to increase the size of the fittings and hose from the crankcase box to the air intake tube.

We have the fittings and hose to do it.

Ted.

Interesting. Is it too small for stock setup or my power levels?

Originally Posted by SOCAL.M6.ZLE

Hey Rob, I am interested to understand why you think a catch can will cause an emissions issue considering the other mods you have? Are you saying you think you will be able to pass smog with a cam, pulley's, tune and E85?

It's a visual/ check engine/ drive monitors thing for them and while I have heard of people passing with a catch can, it definitely doesn't look proper and only gives them ammo to fail you. My cam is still a stock cam technically, so I could run a fully stock tune if I wanted to and I wouldn't run into an issue to smog it or with it running right. Flex fuel will not fail you and they have no quick way to determine OE pulley sizes quickly nor do they have way to prove pulley sizes outside of taking calipers to it but that would require work that they are not authorized to do, nor legally allowed to perform during testing procedures.

My car came with this pulley from a dealer that had to get it smogged before they could sell it. The car also had a tune unbeknownst to them and myself. It passed, so the whole tune thing is not really as big as you would think. This was just last year in 22.