CAMARO6 - View Single Post - ProCharger intercooler air to water switch

Callaway24 · 10-19-2023, 07:12 PM

Recently changed my ProCharger stage 2 intercooler to a air to water one. That’s all I have done. The problem now is that the car will not run. Idles terrible and can’t give it any throttle or it dies. If I remove the intake hose before the maf sensor it runs great. As soon as I move the hose back to the intake tube blowing air from the pc it kills the motor. I replaced the maf sensor and that did nothing. My question is, does it need to be retuned because the new intercooler is so much smaller?

10-19-2023, 07:12 PM	#1
Callaway24 Drives: 2016 Chevrolet Camaro ss Join Date: Jul 2019 Location: Springfield, Tn Posts: 6	ProCharger intercooler air to water switch Recently changed my ProCharger stage 2 intercooler to a air to water one. That’s all I have done. The problem now is that the car will not run. Idles terrible and can’t give it any throttle or it dies. If I remove the intake hose before the maf sensor it runs great. As soon as I move the hose back to the intake tube blowing air from the pc it kills the motor. I replaced the maf sensor and that did nothing. My question is, does it need to be retuned because the new intercooler is so much smaller?