Parts for sale after my 2650 install:
All asking prices INCLUDE shipping to the CONUS unless noted.
Venmo or PayPal- you cover any fees, please.
If you'd like multiple items, let's work out a deal!
Pictures are at the end of the post.
1) Ported stock throttle body - $125
see this thread
2) Magnuson 2650R snout - $150
Brand new for stock 87mm TB. Replaced with the 103 snout when I put on the 2650
3) HP Tuners RTD Gen3 - $150
Brand new. Magnuson branded.
Can be used with HP Tuners VCM Suite Scanner software. This would be a cheap way to gain access to the power of HPT's scanner, without need to spend twice this amount. Then, if you want to get a remote tune from someone on the RTD tuner network, you'll already have the RTD!
4) Magnuson air intake elbow - $60
Brand new. Designed for direct replacement of stock elbow with stock TB (also works with stock blower), but has larger clean-side port, is thicker, and has less "junk" on the inside. Would be a nice addition for someone with a cut stock airbox but spinning the stock blower harder and trying to keep a stock look. I pulled the coupler from the clean-side port, so you'd need to add whatever you want there to mate with your setup.
5) Stock airbox, filter and elbow - $125 + actual shipping (to get you the best deal)
6) Miscellaneous parts - make me an offer, or just cover packing/shipping and spot me a few bucks to pay for my gas to the UPS store and back.
(a) coil pack covers
(b) LT4 valley cover insulation/sound material
(c) LT4 fuel line from HPFP to firewall fuel line
(d) stock blower belt
(e) brake booster line with check valve
(f) evap line
(g) clean side separator to air intake elbow line