Quote:
Originally Posted by 2023_ZL1-AUTO
Good idea, I did the same with a LED voltage meter and just mounted it using 3M double sided trim tape by the OBD2 port, but I can see it while driving just by quickly looking down. I used the grey and black wires used for the vacuum sensor that run from the JMS unit to the throttle peddle since I'm using the peddle to engage voltage boost. This gave me the extra wires to use to carry the voltage from the trunk connection to the LED voltage meter. I explain on my posts I linked above. Make sure you get gauge that can show your voltage to at least 2 decimals. Since you have to set your voltage to 17.47v and not 17.4v
|
By the way, Thanks for the idea of using the black and grey wires. This is a good idea. Also, how do you like your Banks I-Dash? That's what is going into the other pod.