Quote:
Originally Posted by CalgaryZL1
You need to let everything run down from the upper internals to get an accurate measurement before you check it
|
So I just checked the level and it is at the top x and slightly going up the little ramp towards the cylindrical top part of the dip stick. So I think the level is fine. I do want to ask, could I have filled the oil filter too much before I installed it? I know that sounds dumb, but I'm just curious. Because, to be honest this is the first I have ever put oil in the filter. I have done hundreds of oil changes in dozens of vehicles over the years, but never put oil in the filter with no issues. But, I saw it on a video yesterday and I just HAD to try it. lol So when I was putting the oil in the PF64 filter it would go to the top and then "drain" into the filter more. So I kept adding oil and it took about half of the quart. Is this normal?
Or is my oil pump failing.