Quote:
Originally Posted by Boostamoose
Fronts call for an angle torque wrench :
First Pass: 150 Nm (111 lb ft)
Final Pass: 15-30 degrees
Rears are straight forward :
Brake Caliper Bolt (1) » Install [2x] 125 Nm (92 lb ft)
It also states this for the bolts : Apply threadlocker to 2/3 of the threaded length of the caliper bolts
Blue threadlocker
|
Appreciate it Boost! The parts have been in my garage for 2 weeks, while I was looking for that damn spec.
I saw TTY on some other year models for the front, thank you for confirming this on the 20'. I'll buy some new bolts before the pad and rotor replacement.