I also have a plan for spacers...
MSI GT350R studs (+47mm)
These Camaro-specific bolt-on spacers, but remove the studs and drill 15mm holes all the way through to covert them to slip-on spacers. I can't find any appropriate 1.5" slip-on spacers.
https://www.titanwheelaccessories.co...42337193492638
This requires 6mm more room than the 18x11 et35 Apex setup. which shouldn't be an issue as camber plates give me a bit more space, and I have no issue grinding the strut a bit more too.