CAMARO6 - View Single Post - Edelbrock Lid spacer 2650 and duplicate insert

EDFHOBBIES · 08-15-2023, 04:11 PM

See pic talk to Carol I gave here the file a long time ago ask to see an image because I also gave the 112mm adapter to 103mm file so confirm you want the lid spacer. They will water jet how ever thick you want in the mean time pic up extra gaskets from edelbrock and measure the stock bolts the add the thickness of the spacer and do the conversion M6 x L??? Bolt flange that takes a 8mm socket. A normal M6 uses a 10mm flange and wil not work.

I also gave file to dave and kong at same time but I don't think they ever did anything w it.

08-15-2023, 04:11 PM	#6
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	See pic talk to Carol I gave here the file a long time ago ask to see an image because I also gave the 112mm adapter to 103mm file so confirm you want the lid spacer. They will water jet how ever thick you want in the mean time pic up extra gaskets from edelbrock and measure the stock bolts the add the thickness of the spacer and do the conversion M6 x L??? Bolt flange that takes a 8mm socket. A normal M6 uses a 10mm flange and wil not work. I also gave file to dave and kong at same time but I don't think they ever did anything w it. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber