View Single Post
Old 08-12-2023, 08:20 PM   #8
FlukeSS

 
FlukeSS's Avatar
 
Drives: 2020 Camaro 2SS A10
Join Date: Jun 2018
Location: Here
Posts: 1,841
Quote:
Originally Posted by Kamero6 View Post
Hello,

I've been building my relationship with the A10.

So the feature to downshift to the lowest gear possible if you hold the down paddle works and It's amazing.

Now If I'm doing 80mph and I hold it a little bit less time (3/4 sec), I can get a downshift from 10th to 5th for example. If you go over that 1/4 sec it gets to 3rd.


I've tried tapping 1 time to go 9th, and tap and hold 500ms to 700ms and I seem to be hitting 5th more consistently.

What are the rules or mapping for this? Sometimes 10 to 3rd is too much, and 5th would be great, but seems like a super narrow window to hit and get it right.
As others have said: Just to put this out there: Its easier to use Performance Shift Mode without using the paddles at all.

Just slam the gas pedal down to the floor and let off immediately. Car will automatically shift to the lowest possible gear for 7 seconds and hold it and is relative to speed. If you want to hold that gear longer than 7 seconds just move the stick to manual. (Roll Race technique - Soon as you slam the gas shift back to Drive and let the A10 do what it does best)

No paddle shifter required.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
FlukeSS is offline   Reply With Quote