Quote:
Originally Posted by MT-SS1LE
The pair I received were in like new condition with a few minor cosmetic imperfections.
I actually ordered a second set which I should receive this week. Hopefully they are in good condition. Were you happy with the replacement he sent?
|
Actually, both pairs are scratched up pretty heavily, but they did state that there could be cosmetic damage to cover themselves. Also, both pairs were made in different batches, one pair has a metallic paint look, and the other pair was clearly powder-coated. I could just leave them alone and focus on the car, but I like my tools/equipment to look nice. So I'm going to hand-sand the gouges with 320, then run over the whole surface with green 3M pads made for my multi-tool, then clean and shoot with some Rustoleum Matte Nickel paint. At least they will have fewer scratches, and all look the same.
In the first pic, the two on the left look powder-coated to me, and the two on the right look painted silver metallic. Also in the first pic, you can see the stand on the top left of the pic has a bent support brace. I will try to tap that back out with a mallet.
The powder-coater wanted too much money to coat these, so I will just spruce them up myself.