Quote:
Originally Posted by Joshinator99
If you have a big cam, my advice is to immediately install the electronic Smoothboost bypass valve. Solves all these silly vacuum bypass-related idle and driveability issues. It’s available for the 2.9 Whipple and pretty easy to adapt to the new 3.0 too.
Full thread about it here:
https://www.camaro6.com/forums/showt...ht=Smoothboost |
That's pretty interesting, haven't seen that before.
Was hoping to find a cheap fix vs a $1000. If I can't figure something out, I'll probably pick this up.
I found a source for vacuum line restrictors, so I bought a bunch from .007" to .025" to see if it will slow down the action of the bypass valve