CAMARO6 - View Single Post

Shock and Steel · 05-26-2023, 01:00 PM

Hello all. New to the forum... I have a 2023 Convertible 2LT with the 2.0L Turbo. I ordered the ZL Addons Stealth pads, and have a nice 4-ton jack and plenty of 3-ton stands. My concern is, the convertible does not have that 3rd (middle) jack location on the pinch weld. Does anyone have a suggestion on how to get one side of the car up, just for rotating tires front to back. At this point, that's all I'm interested in doing.

**UPDATE**

I installed the ZL1 Addons Stealth Lift Pads, and had each side of the car up. For the fronts I am able to use lift pad to raise the car, and add a jack stand inward on the subframe. However, the rears are tougher. I can lift the backs using the lift pads, but then I am not sure where to place the jack stands. The convertible has extra crossmembers under the frame to add rigidity, and they interfere with jack placement that is suggested online.

Anyone around with some advice?

05-26-2023, 01:00 PM	#9
Shock and Steel Drives: 2023 Camaro Convertible 2LT Join Date: May 2023 Location: NJ Posts: 151	Hello all. New to the forum... I have a 2023 Convertible 2LT with the 2.0L Turbo. I ordered the ZL Addons Stealth pads, and have a nice 4-ton jack and plenty of 3-ton stands. My concern is, the convertible does not have that 3rd (middle) jack location on the pinch weld. Does anyone have a suggestion on how to get one side of the car up, just for rotating tires front to back. At this point, that's all I'm interested in doing. UPDATE I installed the ZL1 Addons Stealth Lift Pads, and had each side of the car up. For the fronts I am able to use lift pad to raise the car, and add a jack stand inward on the subframe. However, the rears are tougher. I can lift the backs using the lift pads, but then I am not sure where to place the jack stands. The convertible has extra crossmembers under the frame to add rigidity, and they interfere with jack placement that is suggested online. Anyone around with some advice? Last edited by Shock and Steel; 05-31-2023 at 07:01 PM.